A Set of PiBot Electronics Kits 2.0D for 3D Printer
A set of electronics kits for 3D Printer.
Feature: Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer. Long cables with quick connector no need soldering. With the multiple quick connector you can put the power cables of parallel connection together in one min. The default 3D printer firmware is already in board (when you get the board use it for first test). Easy Configure the parameters for your machine in "OnePageConfigure.h" in the folder of firmware before upload. Use the PiBot version upload tool and software, building your 3D printer control system, no muss, no strange.
Specification: Main Power Input: DC 12V - 30V (12V recommend) Main Power Input Fuse: 15A Heat bed Power Input Fuse: 20A Length of USB Cable: 1500mm Length of Endstop Signal Cable: 1500mm Length of Stepper Motor Driver Signal Cable: 500mm Length of Stepper Motor Driver Power Cable: 200mm
What you Get: 1 x PiBot Controller Board Rev2.0 4 x PiBot Stepper Motor Driver Rev2.2 1 x PiBot LCD SD Controller Rev1.6 2 x 100k ohm NTC Thermister 3 x PiBot Optical Endstop Rev1.6 3 x Endstop Cable for Controller Board Rev2.x 4 x Stepper Motor Driver Signal Cable for Controller Board Rev2.x 4 x Stepper Motor Driver Power Cable for Board Rev2.x 2 x Multiple Quick Connector for Power Cables 1 x USB Cable Blue 1.50m