Home | About Us | Contact Us | Privacy policy | Shipping | Site map
  My account  
  View cart  
 Search:      Advanced search   



 Pololu High-Power Motor Driver 24v23 CS (item: 1456)

Pololu High-Power Motor Driver 24v23 CS (item: 1456)
CODE: POL.1456

Price: 62.99

In stock 0 items
Amount Out of stock


Pololu High-Power Motor Driver 24v23 CS
Pololu item #: 1456

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 40 V voltage range and is efficient enough to deliver a continuous 23 A without a heat sink. This version outputs an analog voltage proportional to the motor current, and an extra control input allows for coasting in addition to the driving and braking offered by the other Pololu high-power motor drivers.

The Pololu high-power motor driver is a discrete MOSFET H-bridge designed to drive large DC brushed motors. The H-bridge is made up of one N-channel MOSFET per leg, and most of the board˘s performance is determined by these MOSFETs (the rest of the board contains the circuitry to take user inputs and control the MOSFETs). The MOSFET datasheet is available under the “Resources” tab. The MOSFETs have an absolute maximum voltage rating of 40 V; higher voltages can permanently destroy the motor driver. Under normal operating conditions, ripple voltage on the supply line can raise the maximum voltage to more than the average or intended voltage, so a safe maximum voltage is approximately 34 V.

Note: Charged battery voltages can be much higher than nominal voltages, so the maximum nominal battery voltage we recommend is 28 V unless appropriate measures are taken to limit the peak voltage.

The versatility of this driver makes it suitable for a large range of currents and voltages: it can deliver up to 23 A of continuous current with a board size of only 1.8" by 1.2" and no required heat sink. With the addition of a heat sink, it can drive a motor with up to about 37 A of continuous current. The module offers a simple interface that requires as few as two I/O lines while allowing for both sign-magnitude and locked-antiphase operation, and an optional third control input unique to this board allows for coasting. This board also features a current-sensing circuit that measures bidirectional motor current with a magnitude up to 30 A and outputs an analog voltage.

Integrated detection of various short-circuit conditions protects against common causes of catastrophic failure; however, please note that the board does not include reverse power protection or any over-current or over-temperature protection. We recommend you use the integrated current sensor to keep the driver from delivering more current than it can safely handle.

There are currently nine versions of the high-power motor driver, each with a different operating voltage and current range. The three CS versions have the same pinout, and the six non-CS versions have the same pinout. The following table provides a comparison of the high-power motor drivers

What you Get
1 x Pololu item #: 1456

More images

 Customers who bought this product also bought

Price: 34.95

 Related products
thumbnail_0J144.600.jpg thumbnail_0J2213.600.jpg thumbnail_0J625.600.jpg thumbnail_0J107.600.jpg
Pololu 400-Point Breadboard (Item 351)
Pololu High-Power Motor Driver 24v23 CS (item: 1456)
CODE: POL.1456
Pololu QTR-1RC Reflectance Sensor (item: 959)
CODE: #959
Pololu VNH2SP30 Motor Driver Carrier MD01B (item: 706)
CODE: #706
Price: 4.99€

Price: 62.99€

Out of stock

Price: 2.99€

Out of stock

Price: 34.95€

 Send to friend
Name of your friend:  
E-mail of your friend: *
Your name:  
Your e-mail:  
Your message: *



   Home   |   About Us  |   Contact Us  |   Privacy policy  |   Shipping  |   Site map