The UAVrc HUB Connector for 25 or 30mm Round Tubes/Booms. This Module Plate made by Pure Carbon Fiber for Professioanal DIY Frames. Designed from scratch by uavRC team. Unique in the market today, due that you can mounting Carbon Fiber Tubes 25 or 30mm. Best to buid a Multirotor Frame with only that Module and Carbon Round Tubes.
UAVrc Carbon Fiber Motor Plate has the following advantages:
- Significantly Light Weight for this Board with size 88 x 48mm
- High Strength due to 4.0mm Thickness of Carbon Fiber
Specifications: -Carbon Plate Dimensions Approx. Length 88mm, Wide 48mm, Thickness 4.0mm -Carbon Plate Weight Approximetely: 19.5 grams (for 1 x Carbon Plate) - Boom Clamp Weight: 11.7 grams for F30mm Tube Clamps -Product Information: Tensil Strength of Carbon Fiber, (example: CF T700S (epoxy composite) is 2550 Mpa, almost twice stronger than Steel (alloy AISI5130) 1275Mpa and Aluminum (7075-T6) 570Mpa Carbon is almost 4.5 times stronger! -Color: Black Glossy Finish an Red Anodized for Tube Clamps -Material: Pure Carbon Fiber Plate 3K Twill and Alumiunium 6061-T6 fro Boom Clamps
What you Get: 2 x Carbon Fiber HUB Connector 4mm thickness 4 x Tube Clamps set for F30mm tube 8 x Socket Button Head Screws Stainless steel 8 x Lock Nuts for M3 screws
What you will Need to Build a Frame from 0.5m up to 2 meters:
- 4 x uavRC HUB Connectors for 30 or 25mm Round Tubes
- 4 x uavRC Motor Mount Carbon Plate for 30 or 25mm Round Tubes
- 2 or 4 Carbon Fiber Tubes 30 or 25mm
- Screws, Nuts, etc..
What you will Need to Build a Motor Mount:
- 1 x uavRC Motor Mount Carbon Plate
- 2 x NEM Tube Clamps 30 or 25mm fro Round Tubes
- Screws, Nuts, etc..
|
More images |
|
|
|
|