Charger for Li-Po Batteries 7.4 Volt (2 cells) JST connector
For Li-Io and Li-Po Batteries Pack only ! "Affortable price is here! Indoor Use only !
Input Voltage
220V AC Power Supply
Output Voltage
8.4 VDC (2 cell Li-PO)
Weight
xxg
Important Safety Instructions • For Li-ion or Li-PO rechargeable batteries only. • Do not use to charge Alkaline, Carbon Zinc, Ni-Cd, Ni-MH or any other kind of battery not specified on the charger. • Remove the batteries from the unit once they are charged, and disconnect the charger from the power outlet. • For indoor use only. • Please check the output voltage below to charge correct Li-PO Battery ( 2 cells or 3 cells).
Operating Instractions 1. Plug the charger to a household electric outlet. 2. Connect the Li-PO battery. The red LED will illuminate indicating that charging is in progress. 3. The green LED will light up indicating that the batteries are charged and ready for use. 4. After use, disconnect the plug from the outlet and remove the batteries. ALWAYS UNPLUG BETWEEN CHARGES.
Caution • Never alter the plug provided. If the plug does not fit the outlet, the proper outlet must be installed by a qualified serviceman. Improper connection can result in a risk of an electric shock. • Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified serviceman for repair. • Do not disassemble the charger. Incorrect reassembly may result in risk of electric shock or fire. • During charging, unit may feel warm. • Never use as a power source for any electrical equipment. • Do not expose charger to excessive moisture.
Li-Po / Li-Io Charger for 2 cells (7.4V) for 220 VAC Power Supply