FY-30A has an integrated three-axisgyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:
Level flight– When stabilizer is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing.
Emergency Recovery- If you lose orientation or feel the plane out of control, then release all control sticks, maintain throttle and switch on the FY30A.The unit will automatically send the correct signals to balance of the aircraft and regain level flight.
Aerobatics– for the experienced fixed wing 3D pilot, the FY-30A can help you achieve a more accurate flight path, especially in windy conditions. FY-30A makes 3D maneuvers such as inverted flight, , crane etc easier and simpler to achieve and maintain. A great way to practice and improve your 3D flying.
First Person View- for long-distance RC flight via video transmitter, the FY-30A will maintain the balance of your aircraft. You only need to control the heading of your aircraft and enjoy the view.
Firm ware upgrade –The FY-30A firmware is upgradable by connecting to your computer via a USB-TTL cable. As Feiyu Tech continuously improves the FY-30A system, firmware upgrades will be released periodically.
FY-30A One device for Fixed Wing Planes, Quad Flyers and Camera Stabilization The core hardware for the FY-30Ais the integrated three-axis gyro and three-axis accelerometer which is the basis for inertial sensing. The other major components are an inertial navigation platform and strap down attitude algorithm designed for fixed wing aircraft stabilization.
When theFY-30A is in auto-balance mode, it detects the aircraft attitude and horizontal positioning and issues commands to servos that adjust the aircraft control surfaces (Aileron, Elevator and Rudder) so that the aircraft remains level at all times. Due to this auto corrective action to maintain smooth attitude and level flight, the FY-30A makes flying very easy.
When theFY-30A is operating in 3D mode and the aircraft is in an acrobatics flight, the FY-30A will use the 3-axis gyroscope sensors to calculate roll velocity and overall flight attitude. With this data, the system will output corresponding control corrections to maintain a smooth aircraft flight attitude even when doing aerobatics flight.
Since the FY-30A is self contained, it can be used in all weather conditions, indoors or outdoors. Just power up and take off.
FY-30A 3-Axis Stabilizer Device
The FY-30A can be used in the following fixed wing models and Quad Flyers:
Traditionallayout fixed-wing aircraft with Aileron
Elevator and Rudder
Flying wings with rudder
Flying wings with no rudder
Airplanes with no ailerons (rudder and elevator only)
V-tail airplanes with ailerons
V tail airplanes with no ailerons
Quad Flyers (need upload firmware for Quadcopters)
Remote control system:
The FY-30A has been tested to work well with the following RC system:
Anyother system with a neutral position of 1.5 ms (standard remote control device).
FY-30A Operating Mode
The FY-30A can be operated in three flight modes:
Mode1: FY-30A Deactivated Mode.In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot.
Mode2: 3D Control Mode.In this mode, the stabilizer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY-30A will hold the current aircraft attitude. Thisprevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness.
Mode 3: self-balancing mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.
The instruction to change the FY-30A flight modes is via a spare channel on the RC receiver.
FY-30A newest Technology Automatic Balancing
Able to recordthe aircraft level flight attitude and automatically correct for stable flight.
Heading is locked.
Better vibration resistance.
Angular rate automatically determine for better stability and performance consistency during level flight.
3D Model
Hold the aircraft axis during flight, making it easier to complete acrobatic flight.
Vibration Characteristics
When high vibration is experienced,angular rate balance mode is automatically engaged to ensure flight safety
Support Models FY-30A can pre-program via Firmware and be able to use it for:
Traditional layout
Flying wing,
V tails
Aircraft with no ailerons
Camera Stabilization
Quad Copters
PZT Control Mode for Camera
Can be used for camera gimbal stabilization. Linear rate of deflectionstabilization
Attitude Data Output
Data output available Rate: 4HZ per second
Firmware Upgrade Can be upgraded as new firmware is released. for:
Fixed Wing Airplanes
Quad Flyers
Specification
Maximum Roll Rate 2000 degrees/sec.
Size 47x27mm
Weight 20 grams
FY-30A
What you Get: 1 x FY-30A unit 1 x USB TTL cable 1 x Vibration absorbing mount set 1 x Connecting wires set 1 double Sided tape set 1 x English Manual
MULTICOPTERS 
FY-30A Inertial Altitude Stabilizer 
FY-30A newest Technology 
